Mask Anonymous by own hands
Little is known that the mask of Anonymus isa symbol of the fight against dishonest officials, corruption and crimes that occur in power. For the first time this mask appeared in one of the comic books, after which it began to be worn for various demonstrations and rallies. In addition, it has become one of the most famous memes on the Internet. The design of the mask was developed by David Lloyd, he is also an illustrator of the comics.
Materials and Tools
When manufacturing a mask, you may need a variety of materials - from polymer clay to plain paper. You will also need paint (acrylic or gouache), pencils and scissors.
How to make the simplest Anonymous mask from paper
You will not need much effort and knowledge,so that the mask of Anonymus, the photo of which you can see below, was similar to the original. To make the most simple mask, take a plain paper and a black felt-tip pen. If you do not have a felt-tip pen, then you can take a black gel pen or pencil. You can also do with acrylic paint. Below you will see the mask template Anonymus. First, prepare a sheet of white paper and draw a mask on it. To mask Anonymous Gai Fox, you are approached, measure the distance between the eyes and correct the picture if necessary.
Then apply the contours of the face to the mask. Cut out. If you want the Anonymus mask from the paper to not crumple, then make another layer of cardboard. Stick the paper onto the cardboard, attach the rope or gum to the wrong side of the product, and the mask is ready!
Keychain made of polymer clay in the form of Anonymus mask
You can also try to make a keychain in the form of an Anonymous mask from polymer clay. Make the very mask of this material will be quite difficult, so start better with some simple thing.
You will need white polymer clay. To work with light plastic is the hardest, so carefully wipe the table from dust and thoroughly wash your hands. To make a keychain in the form of an Anonymous mask, you can use the template that we put above. First, roll the white polymer clay into a thin layer two to three millimeters thick. Then, draw the mask from the template. If your template is printed on a powder printer, then you can simply make a print on the polymer clay. So you make your creative process much easier. Cut out the mask from the clay layer and make holes for the eyes. Also do not forget to make a small hole for the key chain. And now bake the mask in the oven or in the aerogrill. As soon as the mask of the anonymus is baked, do not get it out of the oven at once, but let it cool down. There you will get the product right away, it can crack. Once the craft has been baked and cooled, remove it from the oven and decorate it with black paint. For polymer clay, it is best to take acrylic.
In the same way, a full-size mask is madeAnonimus from polymer clay. The difference is only in size. In addition, a large mask will be more difficult to bake. After you have painted the mask, you will need to cover it with one or two layers of varnish.
Mask Anonymus from papier-mache
There are many options for how to make a maskAnonymus. And one of the options is papier-mache. Prepare the following materials: plasticine (you can take any - even children's, though sculptural), paper (old newspapers or kraft paper will come off), PVA glue, fine sandpaper for polishing, paints (black and white), lacquer and scissors. Paints are best to take acrylic. You can buy gouache, but it can be slightly greased when covered with varnish.
First, mold out the face relief from the clay. Note that the cheekbones should be large, the mouth wide, and the nose long. So the facial expression will be more expressive. If you've never sculpted a face from plasticine, you can take a muscle atlas and orient yourself on it. After you have fashioned the mask, start gluing it with paper. To do this, take the old newspaper, rip it into small pieces and soak the PVA glue. Cover the face in several layers. Mask Anonymus almost ready! The more layers there are, the more durable and durable the mask will be. After the paper with glue has dried, pull out all the clay. Do this carefully so as not to break the product. Walk on the surface of the mask with fine sandpaper. Then paint it first white, and then paint the face with black paint. Once the paint has dried, cover it with varnish. It is best to varnish in several layers. The mask is ready. It remains to paste the ropes on the wrong side.
More complex options
If the above described methods do not suit you, and youthink how to make an Anonymous mask in other ways, then pay attention to the silicone. Masks made of this material are certainly more complex, but they are more durable and flexible. In addition, you can use ready-made blanks of masks, which will only have to be painted and varnished.